PROCOM PROFESSIONAL COMMUNICATIONS
ANTENNAS, FILTERS AND COMBINERS		  
Welcome Products Catalogues Technical information About PROCOM Contacts
PRODUCTS - ACCESSORIES FOR MICROWAVE ANTENNAS
Back  Print 
 

Accessories for Microwave Antennas  Accessories for Amateur Radio Microwave Antennas

Microwave antenna accessories for amateur radio use


Below is a variety of accessories for the amateur radio microwave antennas.

Please notice that the products are available in the PDF Product Catalogue.		SEE ALSO:





Accessories for the microwave antennas:




BPF 2.5G/7-... Interdigital Band-Pass Filter for the 2.5 GHz Band



7-resonator, interdigital band-pass filter.

Especially suitable for multichannel systems in the 2.5 GHz band.
  • Wide pass range of approx. 100 MHz
  • Low insertion loss and low ripple inside pass range
  • Steep slopes immediately outside the pass range
  • Heavy attenuation outside the pass range
  • Housing made of silvered brass
  • Terminated with SMA-female connectors
  • Two standard versions available
Download PDF file for further details about the BPF 2.5G/7-... Interdigital Band-Pass Filter.



BPF 10G/9 Interdigital Band-Pass Filter for the 10 GHz Band



The BPF 10G/9 is a 9-resonator, interdigital band-pass filter for multichannel systems in the 10 GHz band.




Using interdigital principles the following features are obtained at the same time:
  • Wide pass range
  • Low insertion loss and ripple inside pass range
  • Steep slopes immediately outside pass range
  • Heavy attenuation outside the pass range
The BPF 10G/9 housing is made of silvered brass. Careful design and choice of materials ensure a long
lifetime and reliable operation over a wide temperature range.

The filter can be delivered with centre frequency between 9.5 GHz and 11.5 GHz. The specifications and the
curves below refer to a filter with 500 MHz port width, but interdigital filters with other port widths and filter
characteristics may be quoted on request.

Download PDF file for further details about the BPF 10G/9 Interdigital Band-Pass Filter.



BPF 24G/7 Interdigital Band-Pass Filter for the 24 GHz Band



The BPF 24G/7 is a 7-resonator, interdigital band-pass filter for multichannel systems in the 24 GHz band.




Using interdigital principles the following features are obtained at the same time:
  • Wide pass range
  • Low insertion loss and ripple inside pass range
  • Steep slopes immediately outside pass range
  • Heavy attenuation outside the pass range
The BPF 24G/7 housing is made of silvered brass. Careful design and choice of materials ensure a long
lifetime and reliable operation over a wide temperature range.

The filter can be delivered with centre frequency between 20 and 25 GHz. The specifications and the curves
below refer to a filter with 1 GHz port width, but interdigital filters with other port widths and filter
characteristics may be quoted on request.

Download PDF file for further details about the BPF 24G/7 Interdigital Band-Pass Filter.



BPF 47G/2 Band-Pass Filter for the 47 GHz Band
  • 2-resonator, cavity filter
  • Low insertion loss
  • High image rejection in 47 GHz heterodyne systems
  • Rugged brass housing ensures reliable function and long life time
  • Waveguide flange connection
Download PDF file for further details about the BPF 47G/2 Band-Pass Filter.



5L SMAF Load DC-0-24 GHz
  • Frequency: DC - 24 GHz
  • Typical VSWR: 1.20:1 DC-12 GHz
  • Typical VSWR: 1.60:1 12GHz-24 GHz
  • Impedance: 50 Ω
  • Power (continuous): 5 watt/25° C ambient
  • Power (3 min.): 10 watt/25° C ambient
  • Connector: SMA female
Download PDF file for further details about the 5L SMAF Load DC-0-24 GHz.
   

 
Sitemap  Contacts  Linkup to PROCOM
Back Print Home