 2.4 GHz Base Station Antennas
CXL 2400/... base station wireless network antenna products, examples
 |  | Below are examples from PROCOM's base station antenna product line, i.e. the CXL 2400/... omnidirectional antenna series including wireless network antenna products.
Please notice that more products from the CXL 2400/... series are available in the PDF Product Catalogue. Look for the 2.0 GHz -> band in the index. | | SEE ALSO: |
| |
|
| | |
| |
|
CXL 2400-1/... Base Station Antenna for the 2.4 GHz Band (wireless network)
 The CXL 2400-1/… is a 0 dBd, vertically polarised, omnidirectional rod-type base station and marine antenna for the 2400 MHz band.
The 1” revolving nut mounting system is standard throughout the marine sector, and several different mounting brackets are available, making it possible to install the antenna either on the masthead using FLG or SMR 2, side-mounted on the mast (SMR 1) or mounted on a cross-beam (FLG). Also, the antenna can be mounted on deck or rooftop by means of the FLG.
The higher the antenna is mounted, the better coverage. Avoid mounting the antenna parallel to or in the neighbourhood of other metal parts, such as masts, supporting wires etc., otherwise the SWR and the radiation pattern may be strongly influenced.
A conical glassfiber tube completely encloses the carefully designed radiating element to ensure long dependable service in all climates.
Download PDF file for further details and specifications about the CXL 2400-1/... antenna.
 Please notice, more products are available in the PDF Product Catalogue.
CXL 2400-3LW/... 5 dBi 3 dBd Omnidirectional Base Station, 2.4 GHz Band
 Vertically polarised, omnidirectional base station and marine antenna.
Approximately 5 dBi and 3 dBd gain.
Provided with the sturdy “LW” mast mount – a lightweight, multipurpose, epoxy-coated mounting bracket made of non-corrosive aluminium. The accompanying U-bolts and fittings are made of stainless steel.
To be mounted on vertical or horizontal mast tubes, 16 to 54 mm in outer diameter. The cable can be led either on the outside or along the inside of the mast tube.
Large bandwidth with respect to both SWR and gain. Highly suitable for duplex operation with large spacing between the TX and the RX frequencies.
The antenna element is sealed in a high-quality, conical glassfiber tube.
All metal parts in the antenna are DC-grounded to reduce the noise caused by atmospherical discharge. Consequently, the antenna shows a DC-short across the coaxial cable.
The CXL 2400-3LW/… is a vibration-proof, lightweight, slim-line, corrosion resistant, modern style base station and marine antenna.
Download PDF file for further details and specifications about the CXL 2400-3LW/... antenna.
Please notice, more products are available in the PDF Product Catalogue.
CXL 2400-6/... 6 dBd Omnidirectional Base Station, 2.4 GHz Band
 Vertically polarised, omnidirectional base station antenna and marine antenna.
Approximately 8 dBi and 6 dBd gain.
Simple mounting using the 1” revolving nut system. Wide variety of accessory mounting brackets available.
Large bandwidth with respect to both SWR and gain.
Highly suitable for duplex operation with large spacing between the TX and the RX frequencies.
The antenna element is sealed in a high-quality, conical glassfiber tube. All metal parts in the antenna are DC-grounded to reduce the noise caused by atmospherical discharge. Consequently, the antenna shows a DC-short across the coaxial cable.
The CXL 2400-6/… is a vibration-proof, lightweight, slim-line, corrosion resistant, modern style base station antenna and marine antenna.
Download PDF file for further details and specifications about the CXL 2400-6/... antenna.
Please notice, more products are available in the PDF Product Catalogue.
CXL 2400-8LW/... 8 dBd Omnidirectional Base Station and Marine Antenna, 2400 MHz Band
 Vertically polarised, omnidirectional base station and marine antenna.
Approximately 8 dBd gain.
Provided with the sturdy “LW” mast mount – a lightweight, multipurpose, epoxy-coated mounting bracket made of non-corrosive aluminium.
The accompanying U-bolts and fittings are made of stainless steel.
To be mounted on vertical or horizontal mast tubes, 16 to 54 mm in outer diameter. The cable can be led either on the outside or along the inside of the mast tube.
Large bandwidth with respect to both SWR and gain. Highly suitable for duplex operation with large spacing between the TX and the RX
frequencies.
The antenna element is sealed in a high-quality, conical glassfiber tube. All metal parts in the antenna are DC-grounded to reduce the noise caused by
atmospherical discharge. Consequently, the antenna shows a DC-short across the coaxial cable.
The CXL 2400-8LW/… is a vibration-proof, lightweight, slim-line, corrosion resistant, modern style base station and marine antenna.
Download PDF file for further details and specifications about the CXL 2400-8LW/... antenna.
Please notice, more products are available in the PDF Product Catalogue.
|